2”x 6”x 10’ – Ten pieces
Take four 2 x 6 x 10’ pieces. From each of these four 2 x 6 x 10’ pieces cut a bed rail (M1-03) and ladder rung (M1-01) from each one. You now have four bed rails (M1-03) and four ladder rungs (M1-01). Now take four more 2 x 6 x 10’ pieces. From each of these four 2 x 6 x 10’ pieces cut a corner post (M1-02) and a ladder rung (M1-01) from each one. You now have four corner posts (M1-02) and four more ladder rungs (M1-01). Take the remaining two 2 x 6 x 10’ pieces and cut three ladder rung pieces (M1-01) from each one. You now have six more ladder rungs (M1-01).
You now have a total of four bed rails (M1-03), four corner posts (M1-02), and fourteen ladder rungs (M1-01).
2”x 4”x 10’ – Eleven pieces
Take four of the straightest/absolute best looking 2 x 4 x 10’ pieces. From each of these cut a 76-1/2” safety rail piece (SR) and a bed slat (SLT). You now have four of the 76-1/2” safety rail pieces (SR) and four twin bed slats (SLT). Now take the remaining seven 2 x 4 x 10’ pieces and cut three twin bed slats (SLT) from each one. You now have twenty one more twin bed slats (SLT).
You now have a total of four 76-1/2” safety rail pieces (SR) and twenty five twin bed slats (SLT). Because you only need twenty four twin bed slats, you may want to use the remaining twin bed slat to cut the 2-1/2” pieces as outlined in the “Safety Rails” section of the manual.
1”x 4”x 8’ – One piece
Take this one 1 x 4 x 8’ piece and cut six 15” safety rail pieces (SR) as outlined in the “Safety Rails” section of the manual. Only four pieces are needed. Keep the extra two, as they can be used for the next safety rail you make.
2”x 2” x 8’ – Five pieces
Take four of the 2 x 2 x 8’ pieces. From each of these 2 x 2 x 8’ pieces cut a bed rail cleat (CL-01) from each one. You now have four bed rail cleats (CL-01). With the remaining 2 x 2 x 8’ piece, cut two “Guides” as outlined in the “Storage Drawer & Trundle Bed Guides” section of the manual.
